About Hacking

2006-08-28T01:31:00.000-07:00

The Important software
1. Warnet Cleaner
WarnetCleaner adalah program untuk para membantu para OP / Admin Warnet untuk membersihkan file-file sampah, berunsur sex, file picture serta movie dan files executable yang berada di drive D bahkan program ini dapat merapikan drive user lebih baik, sehingga sangat membantu para OP dalam membersihkan file-files user yang di anggap mengganggu. Download This File

2. Deep Freeze v6
Download This File

3. Brutus
Download This File

Ini Aja, Bsok Nyambung lagi...

Learning

2006-08-25T23:46:00.000-07:00

My Friend (Gun)

The Resetter For our Printer If Condition " Low Ink Tank "

Canon Waste Ink Tank Reset Procedures
Canon GENERIC "S" SERIES RESET CODE
Waste Ink Counter Reset.
(1) Turn off the printer.
(2) Press and hold the RESUME button, then press and hold the POWER button.
(3) Release the RESUME button, Next press and release the RESUME button two(2) more times in
succession. Note: you are still holding the POWER button). The printer's carriage will "reset"
or move momentarily. If the above was properly performed the printer will enter the
"Service Mode".
(4) Press the RESUME button 4 times, this will select the clear waste ink counter function. The lamp
will alternate (change) color with each key press.
1. Service/Factory test printout, including ink sensor check.
2. EEPROM - Info printout.
3. EEPROM - Initialization.
4. Reset the Waste ink counter.
5. Printer model setting. (More selections beyond this point - However it is best leave them unaltered - You have been warned!)
After selecting the desired mode (eg 4), press the POWER button to "set" the change, and return to the top of the function selection menu. Press the POWER button again to restart the printer.

++++++++++

Canon i320, i255
Waste Ink Counter Reset.
Step 1 : Manual for service mode
1. Unplug power and USB.
2. Open door and hold power button.
3. Connect power.
4. Close door, then release power button.
or Step 1: Manual for service mode
1. Turn off the printer. And disconnect the printer cable.
2. Press and hold the POWER button, turn on the printer.
3. The indicator (L.E.D.) should be green.
4. Press and release the RESUME button , the indicator (L.E.D.) should be orange.
5. Press and release the RESUME button again, the indicator (L.E.D.) should be green.
6. Release both buttons.

step 2 : Software for Permanant

1. Reconnect the printer cable.
2.Open General Tools software and select (USB PORT)
3 .Choose (SET DESTINATION 1) And it should be reset.

Remark "After service mode Pls use software for permanent reset"

++++++++++

Canon PIXMA iP1000
Waste Ink Counter Reset.
Step 1: Manual for Service mode
1. Unplug power and USB.
2. Open door and hold power button.
3. Connect power.
4. Close door, then release power button.

step 2 : Software for Permanant

1. Reconnect the printer cable.
2.Open General Tools software and select (USB PORT)
3 .Choose (SET DESTINATION 1) And it should be reset.

Remark "After service mode Pls use software for permanent reset"

++++++++++

Canon PIXMA iP1500
Waste Ink Counter Reset.
Step 1: Manual for Service mode
1. Unplug power and USB.
2. Open door and hold power button.
3. Connect power.
4. Close door, then release power button.

step 2 : Software for Permanant

1. Reconnect the printer cable.
2.Open General Tools software and select (USB PORT)
3 .Choose (SET DESTINATION 1) And it should be reset.

Remark "After service mode Pls use software for permanent reset"

++++++++++
Canon i850, i950, S600
Start with the printer OFF
1. Hold down RESUME and then hold down POWER
2. release RESUME
3. press RESUME twice, then release POWER
4. Let green light blink until printer is done futzing
Select function with RESUME press POWER to execute:
presses - light color - function
Number of presses - light color - function
0 presses - green - Test print (or exit service mode on i960)
1 press - orange - EEPROM info print (plus grid nozzle diagnostic on i960)
2 presses - green - EEPROM initialize
3 presses - orange - Reset waste ink counter

++++++++++
Canon S450 Printer
1: Power off printer
2: Hold Resume button then press and hold POWER, the beeper will sound once.
3: Hold POWER and release RESUME
4: Press RESUME twice
5. Release Power button
6: When the indicator lights steady, press RESUME three(3) times. The indicator should be orange.
7: Press Power to set data

++++++++++
Canon BJC 1000 Serie
1: Remove Cartridge
2: Unplug the AC Power Cord
3: Hold down the RESUME button
4: Release RESUME after plugging in the AC Power cord.
5: Press the RESUME once within 5 seconds and release the RESUME .
6: Press and HOLD RESUME for two seconds or more and release it.
7: Press and HOLD RESUME for two seconds or more and release it.
8: Unplug AC Power Cord to set data.

++++++++++
Canon BJC-2000 BJC-2100 Serie
1: Remove the Cartridge
2: Unplug the AC Power Cord
3: Close Front access panel
3: Hold down the RESUME/RESET button and plug in the AC power cord
4: Release RESUME/RESET after plugging in the AC Power cord.
5: Press the RESUME/RESET once within 5 seconds and release the RESUME/RESET .
6: Press and HOLD RESUME/RESET for two seconds or more and release it.
7: Press and HOLD RESUME/RESET for two seconds or more and release it.
8: Unplug AC Power Cord to set data.

++++++++++

Canon BJC-210 BJC-240 BJC-250 BJC-255 BJC-265
Canon BJC-4100 BJC-4200 BJC-4300 BJC-4400 BJC-4550 BJC-4650
Unplug Power Cord
Hold POWER and RESUME buttons
Plug in Power Cord
Release buttons
Open front door of printer
Hold the CARTRIDGE and RESUME buttons
Press POWER
Release all buttons after the beeps
Press CARTRIDGE once
Press RESUME

++++++++++
Canon BJC-5000
1: Power off printer
2: Press and hold RESUME then press POWER, The indicator will start blinking.
3: While the indicator is blinking , Press RESUME twice then Wait until the printer beeps to indicate service mode
5: When the indicator lights steady GREEN, press RESUME four(4)times. The indicator should be GREEN.
6: Press Power to set data
Service Test Print
1: Power off printer
2: Press and hold RESUME then press POWER, The indicator will start blinking.
3: While the indicator is blinking , Press RESUME twice then Wait until the printer beeps to indicate service mode
5: When the indicator lights steady GREEN, press RESUME two(2)times. The indicator should be GREEN.
6: Press Power to Print
Nozzle Print
1: Power off printer
2: Press and POWER, until the printer beeps and release.
Demonstration Print
1: While the printer in ON , , Press and hold RESUME until the printer plays a melody of beeps.

++++++++++

Canon BJC-5100
Self Test
Switch Printer off. Hold Power for 1 beep.

Waste Counter Reset
1: Power off printer
2: Press and hold RESUME then press POWER, The indicator will start blinking.
3: While the indicator is blinking , Press RESUME twice then Wait until the printer beeps to indicate service mode
5: When the indicator lights steady GREEN, press RESUME four(4)times. The indicator should be GREEN.
6: Press Power to set data
Service Test Print
1: Power off printer
2: Press and hold RESUME then press POWER, The indicator will start blinking.
3: While the indicator is blinking , Press RESUME twice then Wait until the printer beeps to indicate service mode
5: When the indicator lights steady GREEN, press RESUME two(2)times. The indicator should be GREEN.
6: Press Power to Print
Nozzle Print
1: Power off printer
2: Press and POWER, until the printer beeps and release.
Demonstration Print
1: While the printer in ON , , Press and hold RESUME until the printer plays a melody of beeps.

++++++++++
Canon BJC-3000 BJC-6000 BJC-6100 BJC-6200 S400 S450 F300 F600 F620
Canon BJC-7000 BJC-7100 BJC-8000 BJ-F800 i6500

1: Power off printer
2: Hold Resume button then press and hold POWER, the beeper will sound once.
3: Hold POWER and release RESUME
4: Press RESUME twice
5: When the indicator lights steady, press RESUME three(3) times. The indicator should be orange.
6: Press Power to set data

++++++++++

Canon BJC-600 BJC-600e BJC-610 BJC-620
1: Unplug Power Cord
2: Hold POWER and FF and Print Mode buttons
3: Plug in Power Cord
4: Release after the beeps

++++++++++

Canon BJC-50 BJC-55 BJC-80 BJC-85 M40 M70
1: Unplug Power Cord
2: Hold POWER and RESUME buttons
3: Plug in Power Cord
4: Release buttons after the printers starts up
5: Hold CARTRIDGE and RESUME
6: Press POWER
7: Release all buttons after the beeps
8: Press CARTRIDGE 16 times
9: Press RESUME
10: Unplug the Power cord

++++++++++
Canon BJ-30 BJC-35v BJC-70
F14 Error Reset
1: Unplug adapter
2: Hold POWER
3: Plug in ADAPTER
4: Release POWER after printer starts
5: Hold FF and MENU and press POWER
6: Release after beeps
7: Press <> Cartridge until 1A is displayed
8: Press ONLINE
9: Press POWER to shutoff printer
10: Unplug printer then re-plug printer

++++++++++
Canon BJ F900, F890, F700, F500, S900, S820, S750 and S520
Turn off the printer.
Press and hold the RESUME button, then press and hold the POWER button.
Release the RESUME button, then press and release the RESUME button two more times in succession. (youre still holding the POWER button during this). The printer mechanics will move momentarily.
You are now in Service mode.
Pressing the RESUME key will select a function; for example, pressing RESUME 4 times will select the clear waste ink counter function. The lamp will alternate color with each key press.
1. service/factory test printout, including ink sensor check
2. EEPROM info printout
3. EEPROM initialization
4. Clear the waste-ink counter
5. Printer model setting. (more selections beyond this- leave this alone)
After selecting mode, press the POWER button to commit the change, and return to the top of the function selection menu. Pressing the POWER button again turns off the printer for a resta

++++++++++
Canon S9000, S300, S400, i550, i560, i850, i860, i865, i9100, i9950, PIXMA iP3000 above,
1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not, press the Power button once more.
8. Your printer should respond as normal.

+++++++++

Canon S900, S820, S750, S520
Turn off the printer.
Press and hold the RESUME button, then press and hold the POWER button.
While still holding the POWER button, Release the RESUME button, then press and release the RESUME button two more times in succession.
The printer mechanics will move momentarily. You are now in Service mode. Release the Power Button.
Pressing the RESUME key will select a function; for example, pressing RESUME 4 times will select the clear waste ink counter function. The lamp will alternate color with each key press.

1. Service/factory test printout, including ink sensor check
2. EEPROM info printout
3. EEPROM initialization
4. Clear the waste-ink counter
5. Printer model setting. (more selections beyond this- leave this alone)

After selecting mode, press the POWER button to commit the change, and return to the top of the function selection menu. Pressing the POWER button again turns off the printer for a restart.

++++++++++

Canon S9000
Turn off printer
Hold down Resume button and press Power button.
Keep holding down Power button and let Resume button go.
Press Resume button 2 times then let BOTH buttons go.
Green lights will flash and then stop blinking.
When green lights are solid, press the Resume button 4 times.
Press the Power button and the printer should turn off, if not, press the Power button once more.
Your printer should respond as normal.

+++++++++

Canon MPC190
Reset Waste Ink
1) Enter SERVICE MODE.
By pressing Menu, Copy, Scan, Copy, Copy
2) Select TEST MODE.
3) Select [8] PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR].
5) Select 0. [INK COUNT].
6) Press the [Set] key.
7) Press the [Stop/Reset] key (returning to the state of 3)), and then press the [ON/OFF] key.

Computers & Software

2006-08-25T23:10:00.000-07:00

About Tutorials software important for us, and I like this site !!
I. Tutorial and Learning about computer from ilmukomputer.com
Click Here
II.Tutorial and Learning about computer from klik-kanan.com
Click Here

Or here a few list of learning about computer
1. Tutorial Delphi from ilmukomputer.com Click Here

2. Tutorial Pemrograman ASP.NET Database dengan VB.NET from ilmukomputer.com Click Here

3. Tutorial Pengantar Pemrograman Berbasis Pemrograman Berbasis Aspek (AOP) from ilmukomputer.com Click Here

4. Tutorial Microsoft Windows from ilmukomputer.com Click Here

5. Tutorial Logika & Algoritma ( FlowChart) from ilmukomputer.com Click Here

6. Tutorial Photoshop 8 from ilmukomputer.com Click Here

7. Tutorial Tips & Trik PHP from ilmukomputer.com Click Here

8. Tutorial Pengantar e-learning from ilmukomputer.com Click Here

9. Tutorial Pengantar Voip from ilmukomputer.com Click Here

10.Tutorial Pengenalan Firewall from ilmukomputer.com Click Here

11.Tutorial Teknologi Jaringan Komputer from ilmukomputer.com Click Here

12.Tutorial TCP/IP from ilmukomputer.com Click Here

13.Tutorial Pengenalan Linux from ilmukomputer.com Click Here

14.Tutorial Panduan Instalasi Mandrake from ilmukomputer.com Click Here

15.Tutorial Merakit PC from ilmukomputer.com Click Here

Hosting Free with ASP

2006-08-25T23:07:00.000-07:00

Get hosting free for ASP for your Site here !!
1. DiscountASP.NET
3 Months FREE of Microsoft ASP/.NET Hosting supporting ASP, ASP.NET 2.0/1.1, FREE ASP/.NET Components, SQL 2005/2000, Real-Time SQL Backups, SQL Restore Tool, Multi-Domain Management, Instant Setup & more! Voted #1 ASP/.NET Host by asp.netPRO Magazine!. Just Click here for Link this site !

2. MaximumASP
MaximumASP – Secure, Patched and Monitored Hosting. Dedicated Hosting Special Offer: 1st Month Free. Comprehensive network protection, automated server patching, advanced server monitoring, and award-winning support from experienced MCSE engineers. Just Click here for Link this site !

3. Corporate Web Solutions
Corporate Web Solutions leads the industry with Active NT hosting starting at less than $20 per month and Active NT Database hosting plans for $25 per month.
Just Click here for Link this site !

4. Lunarpages Windows Hosting Unbeatable Reliability = Lunarpages Windows Hosting. 5GB space & 400GB bandwidth, $700 of CoffeeCup Software free. Award winning 24-7 Customer Support. Lunarpages is the #1 Windows web host! Just Click here for Link this site !

5. Protec Windows Web Hosting
Reliable Windows web hosting plans. Includes ASP, ASP.NET 1 & 2, PHP, MS SQL, MySQL, Anti-Virus, Anti-Spam, SSL, Frontpage, DotNetNuke and other Auto Installers, Advanced Control Panel, Quality Support, 30-day money-back guarantee and much more. Just Click here for Link this site !

6. Nexpoint Web Hosting
Windows 2003 Servers featuring 500MB, ASP, ColdFusion MX, PHP ODBC, MSSQL, and ASP .NET, starting at $8.25/month. Sign up and receive a free domain name! Dedicated Servers start at $85/month; 24/7 Premier Support, and a 30 day guarantee. Try now!
Just Click here for Link this site !

7. Layerblue Networks
Layerblue Networks provides single, multi, and reseller windows 2003 web hosting. With feature packed plans starting at $4.95/month and guaranteed uptime, its time to step up to CODE BLUE. We support ASP, ASP.NET, ColdFusion MX, give us a try.
Just Click here for Link this site !

8. DailyRazor ASP Hosting
3 Months FREE Hosting. FREE Setup! FREE Domain Name! FREE Components! Up to 6 GB Disk Space! Up to 100 GB Bandwidth! Unlimited Web Apps! Multiple Domain Hosting! MS SQL, MS Access, MySQL Support! 30 Days Money Back Guarantee! 24/7 tech support!
Just Click here for Link this site !

9. Infosaic Technologies, LLC
Windows 2003 Host from $5/mo, supporting ASP,.NET, FrontPage, MS Access, ISAPI ReWrite, ODBC Support, WebMail & more. Free Install on .NET Starter Kits, DotNetNuke & ASPForums. 24x7 support, 30Day Money Back Guarantee & FREE Domain w/ each Annual Package! Just Click here for Link this site !